This is a sloping roof solution , there are other customized solutions for flat roof, curved roof and multi-wave folded roof.
- Lithium Ion Battery
Custom lithium battery solutions are customized according to size, capacity, voltage and other requirements
- Battery Storage Container
Industrial and Commercial Energy Storage System Solution
- Battery Backup For Home
5 kwh Stackable Stacked Battery System For Off Grid System Solution
- Battery Generator For Home
Power Wall Battery 5Kwh Solar Power Energy For Solar House Generator System Solution
- Solar Generator For Home Balcony
Home Balcony Solar Energy Storage System Solution
- Portable Power Station
Solar Generation Portable Power Station Energy Storage System Solution
- Marine Battery
Custom 48V 100Ah 5000W Stacked Marine LifePO4 Battery Solar Energy Storage System Solution
- RV Battery
Custom 12V 100Ah Vans&RVs LiFePO4 Battery Energy Storage System Solution
Powerwall Battery Solar Powered Generator For Home
Powerwall Home Backup Battery And Custom Solar System For Whole House
Home / Powerwall Battery Solar Powered Generator For Home
What is Powerwall Solar Powered Generator System
Powerwall solar generator system is a household energy storage device installed on the wall. It is mainly composed of a battery pack, a controller and an inverter. It is charged by solar energy or other power sources and stores electrical energy through the battery pack. When the user needs electricity, the controller will monitor the power of the battery and start the inverter to convert the direct current into alternating current for use.Powerwall solar generator system is not only energy-saving and environmentally friendly, but also improves the efficiency of electric energy utilization.
5.1KWH all in one system
Why a Battery Energy Storage System is Needed for Homeowners
Reduce electricity cost
The solar power generation system is used to continuously generate electricity in sunny weather, and then the energy storage device is used to store the remaining electricity used during the day for night use. Excess power can also be sold to the grid.
Environmental protection and energy saving
Energy storage equipment can reduce energy waste and pollution, reduce the use of fossil fuels, so as to achieve the purpose of environmental protection and energy saving.
Coping with energy fluctuations
As renewable energy continues to grow in popularity and prices, households are increasingly turning to renewable energy, such as solar or wind power. However, these energy sources will be affected by factors such as weather. Energy storage devices can help families better cope with this situation and stabilize power supply.
Emergency backup power supply
In emergencies, such as typhoons or floods, power outages, etc., energy storage devices can provide emergency backup power for families to ensure their basic living needs.
Peak valley arbitrage
Many countries adopt the peak-valley electricity price system, and use energy storage equipment to store energy during the valley electricity price period and supply power during the peak electricity price period, further reducing household electricity costs.
5.1 KWH Powerwall Battery Solar Generation System
5.1 KW
Match it like this: A powerwall battery storage system. Using high-efficiency solar panels, solar storage inverters, and a DYPOWER1 powerwall battery integrated system, it can realize off-grid energy storage, grid-connected energy storage, and reverse electricity sales functions; intelligent peak and valley scheduling meet the purpose of saving energy and money for users. And take into account the emergency power supply function. And it can be easily configured with a 10kWh, 15kWh, or 20kWh home battery system. The modular design of the battery cabinet supports multiple sets of parallel connections, which is conducive to meeting higher energy storage capacity and facilitating installation and expansion of power and capacity. Low cost and easy to operate.
Various Solutions
| item | Model | Description | Quantity |
|---|---|---|---|
| 1 | Solar Panel | 550W/Broken Shell Process or Heterojunction Process | 10pcs |
| 2 | Hybrid Inveter | 3KW EU standard or US standard | 1pcs |
| 3 | Powerwall Battery | Nominal Energy:5.1KWH Discharge Current: 100A | 1pcs |
| Other Spare Parts | Combiner Box | 5inputs 2 outputs | 1pcs |
| Other Spare Parts | Tools Bag&Bracket | 5~10 kinds of PV installation tools&Solar panel bracket | 1bag&2~4 sets |
Specific
Only applicable to this solution
Solar Power Wall
- Connection Type
- 16S1P
- Cell
- 6PCS
- Nominal Energy
- 5.1KWH
- Discharge Current
- 100A
- Size
- 660*460 180(mm)
- Weight
- 45Kg
- Cycle
- 4000~6000 Times
Key Features
- Large capacity, high working voltage
- Long cycle life, economical for long-term use
- High safety, safe and fast charging and discharging.
Solar Pannels
- Power
- 550W
- Operation voltage
- 41.33V
- Operation current
- 13.3A
- Shot circuit current
- 13.79A
- Open circuit current
- 49.83V
- Size
- 2279*1134*35 (mm)
Key Features
- High module efficiencythrough superior manufacturing technology.
- No power loss thanks to improved temperature co-efficient caused by 5 busbar solar cell.
- Strictly control the micro-crack of solar cells and the other non visible defect ofinternalmodules.
How a Powerwall Battery Solar Generation System Works
Connection Method
Solar Power Plant
Hybird energy
During the day
Use solar panels, an AC outlet, or a carport to recharge your home backup battery power station and store excess battery energy.
At night/during power outages
When fully charged, the power is stored in the portable generator, which provides backup power in case of emergency.
Highlights of E-lary Home Energy Storage batteries
Powerwall lithium phosphate batteries are compatible with most mainstream inverters. Every process from R&D to production is strictly controlled, with 9 major safety protection measures.
Short circuit protection
Over-charged protection
Discharge protection
Overvoltage protection
Overcurrent protection
Over-temperature protection
Back charge protection
Reverse Voltage protection
Transport protection
Why Choose E-lary
Higher Standard
All system components of E-lary adopt the industry's top technology and high-quality materials to ensure the service life of the product and improve the user experience.
- Using high-performance solar panels: High-quality silicon wafers and high-efficiency battery technology maximize the use of solar energy, compatible with lithium batteries and lead-acid batteries
- Select the industry's high-end inner core: The maximum number of cycles can reach 6000 times, the service life is long, and the comprehensive finished product is low.
Customized
E-lary focuses on meeting customer needs, thinks what customers think, and provides customized home system solutions for different customers.
Differentiated customization :Experienced engineers can customize the whole house scheme according to customer needs free of charge, saving time and worry.
- Flexible installation:
- Two installation methods are available: Offline installation: on-site installation by our engineers
- Online guidance installation: We can send installation package, including all installation accessories, provide installation video, and guide installation online.
Safe and Reliable
- Waterproof and lightning protection, to ensure the safety of users using electricity
- High battery safety, safe and fast charge and discharge
- The solar panel has passed the sand dust/salt spray/ammonia gas corrosion test, effectively coping with the harsh environment.
Service Support
- Quality assurance: 1~2 year worry-free warranty is provided for core components, and other accessories can be purchased through the official website to ensure the continuous supply of accessories.
- Worry-free after-sales: a professional team answers customers' questions during use and calls back regularly.
Frequently Asked Questions
- Battery Protection & Charging: Why Inconsistent Voltages and Activation Steps?1. The order of wiring is wrong, measure the wiring to confirm whether the voltage of each battery string is correct.2. After power-on protection, the lithium iron battery is at 2.8V-3.4V, and the polymer (ternary) is at 3V-4V. Charge or discharge the battery to the voltage range without the protection board, and then connect the protection board.3. The discharge MOS tube is closed. Charge activation
- After the batteries are matched, why are the charging rates somewhat higher and some lower?It may be related to the capacity or internal resistance of the battery. You can first lower the high or low battery separately or charge it up to the same voltage as other batteries. Charge and discharge several times to see if the voltage of the string of batteries is still high during charging, it means the capacity of the string of batteries is low. Otherwise, the battery capacity is high. It is also related to the assembly method. Try to make the series wires and parallel wires the same thickness and length, or check the welding point of the balance wire, it may also be affected. Note that the protection board only detects the voltage of the battery and does not change the voltage of the battery
- About overcurrent protection?The overcurrent protection is 2 to 3 times of the continuous current, and it will be protected only when the overcurrent value is reached within 200ms. If the continuous current of the protection board is exceeded and the overcurrent value is not reached, the protection board cannot bear it, and the heat will be severe, which may burn out. Overcurrent protection is to protect the abnormal large current in the battery circuit, such as: the controller does not start the current limit, the motor is blocked, short circuit, etc., are all abnormal large currents, and have no current limiting effect
Please send your message to us
E-lary has always been committed to renewable,sustainable and eco-friendly green energy products,unlocking more possibilities.
Our customer service team is online 24 hours a day, if you have any questions, please contact us,
Please send your message to us
E-lary specializes in customizing batteries and providing energy storage solutions to meet your energy needs while helping you with pre-sales and after-sales service support so that you have no worries. Click on the message to send your needs and sincerely look forward to being friendly with you. cooperate.
- Tel
- *Title
- *Content
subscription
Please send your message to us
E-lary specializes in customizing batteries and providing energy storage solutions to meet your energy needs while helping you with pre-sales and after-sales service support so that you have no worries. Click on the message to send your needs and sincerely look forward to being friendly with you. cooperate.
- Tel
- *Title
- *Content